Steam cleaner with high steam temperature | Bowlift

Baked-on grease on the stove that hasn’t budged for weeks—and scrubbing just makes it worse.

Reaching for the next grease remover often results in chemical fumes, irritated hands, and a kitchen that still isn't clean. The VaporaClean™ steam cleaner heats water to 105 degrees Celsius in 15 seconds and blasts a powerful steam jet at grease, mold, and dirt—without chemicals, without waiting times, without residues on the countertop. Kitchen, bathroom, upholstery, or joints: a single water tank is enough for an entire room.

Benefits

• No more scrubbing: The 105-degree steam penetrates between dirt and surface, breaking down baked-on grease and limescale before you even touch the sponge—hours of scrubbing are a thing of the past.
• No switching between cleaning agents: Six adjustable steam levels on the LCD display allow you to work on upholstery just as easily as on hoods—one device replaces an entire cabinet full of spray bottles.
• No worries about residues on food contact surfaces: Only distilled water goes into the tank, pure steam meets the surface—no chemicals that need to be wiped off afterward, not even on countertops, children's toys, or pet beds.

Specifications

• Steam temperature: 221 °F / approx. 105 °C
• Heating time: 15 seconds

Water tank volume:

• 37.2 fl oz / approx. 1.1 liters
• Power: 1,500 W
• Steam levels: 6 adjustable levels with LCD display
• Dimensions: approx. 20 x 14.5 x 13 cm
• Housing material: ABS plastic
• Color: White or Black
• Plug: EU plug

Application

1. Filling: Fill the water tank with distilled or demineralized water—tap water leaves limescale deposits in the tank and reduces steam performance over time.
2. Setting: Turn on the device, select the desired steam level on the LCD display, and attach the appropriate accessory—low level for upholstery, high level for joints and greasy surfaces.
3. Cleaning: Aim the nozzle at the dirty area, press the trigger and let the steam do its work—then wipe with a microfiber cloth.

Pro tip: For stubborn joints, place the steam nozzle directly on and let the jet work for 3-5 seconds before using the joint brush—the dirt will loosen up without pressure.